These enclosures are designed to permit convenient and secure mounting of certain vendors network cameras with PZT functionality. The enclosures are designed with “keyed alike” locks, and egress points for door mounted antennas (for Wi-Fi enabled netcams). The enclosures are designed to the UL50 standard for enclosure integrity. Low distortion domes are available either clear or tinted.
| Model 1055-00: |
| Dome Locking Access Point or NetCam Ceiling Enclosure |
|
-
Aesthetic ceiling mount designed for access points with non-detachable antennas and network cameras (reference enclosure selection guide )
-
Designed for Cisco/ Airespace1010, 1020, 1030 and Cisco 1100 AP's and the Sony SNC-RZ30N NetCam
-
Designed to meet NEC300-22 and 300-23 for plenum installations, OSHPD approved OPA # 1638 (pdf)
-
Construction: Aluminum and steel enclosure, acrylic dome
-
Reversible mounting plate to accommodate camera or access points
-
Hinged locking door, keyed alike
-
Standard smoke color dome, white or clear domes available
-
Size: 24" x 24" x4½", AP Enclosure is 12" x 12" x 3¾", Dome-9" Dia. x 5½" High
-
Weight: 13lbs (not including access point or camera)
|
Model 1055 Includes:
- Clamp connector
- Mounting Plate, Mounting Screws & Hardware
- Eyelets for suspension using support wires
- Mounting Instructions
|
Enclosure PDFs: |
Spec Sheet | Installation Instructions | Customer Prints |
|
| Model 1080-00 |
|
-
Specifically designed to be used with Sony SNC-RZ30N Wireless Net Cam. The exclusive rack mounting system can be modified to fit most access points.
-
Construction: 16 gauge steel, NEMA 3R type construction
-
Accommodates one (1) access point or radio bridge and one (1) wireless net camera
-
Hinged locking door is standard
-
Color: ANSI 61 gray
-
Size: 12 ¼" x 10 ¾" x 11 ¼""
-
Weight: 17lbs (not including access point or antenna)
|
Enclosure PDFs: |
Spec Sheet | Installation Instructions | Customer Prints |
|
| Model 1081-00 |
|
-
Specifically designed to be used with Sony SNC-RZ30N Wireless Net Cam. The exclusive rack mounting system can be modified to fit most access points.
-
Construction: 16 gauge steel, NEMA 3R type construction
-
Accommodates one (1) access point or radio bridge and one (1) wireless net camera
-
Hinged locking door is standard
-
Color: ANSI 61 gray
-
Size: 12 ¼" x 10 ¾" x 11 ¼""
-
Weight: 17lbs (not including access point or antenna)
-
Heater Specs: 102V, 50-60Hz, 150W
-
Cooling Fan Specs: 102V, 50-60Hz, 10W
-
Thermostat Specs: 15A, AC 120V/10A, AC 250V - Set temp range: 32° - 140° F
|
Enclosure PDFs: |
Spec Sheet | Installation Instructions | Customer Prints |
